Note: Plastic Printed Parts are not included.

Including: (from Mar 15, 2012)
1x Complete Extruder Hardware Set
3x 608zz Ball Bearing
2x Heat Resistors
1x Aluminum Heater Block
1x Thermistor NTC Glass 100K
1x High Quality Kapton Tape (6.4mm width x 33m Long)
1x PTFE Rod(16mm x 40mm) and 1x M6 Brass Barrel (outlet:M6 thread, Length:40mm): (choose one pair of the following)
    a. inner diameter for 1.75 mm
    b. inner diameter for 3.0mm filament

1x Brass Nozzle (inner: M6 thread): (choose one of the following)
    a. 0.34mm
    b. 0.5mm

 

Note: Before Mar 15, 2012, Extruder Parts included the following items:

1x Complete Extruder Hardware Set
3x 608zz Ball Bearing
1x Nichrome Wire (1 meter)
1x Thermistor NTC Glass 100K
1x High Quality Kapton Tape (6.4mm width x 33m Long)
4x Compression Spring
1x PTFE Rod(16mm x 40mm) and 1x M6 Brass Barrel (outlet:M6 thread, Length:50mm): (choose one pair of the following)
a. inner diameter for 1.75 mm
b. inner diameter for 3.0mm filament

1x Brass Nozzle (inner: M6 thread): (choose one of the following)
a. 0.34mm
b. 0.5mm

 

 

How to build RepRap Prusa Mendel Wade's Extruder

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: